Wire Forming Pliers

Versatile loop forming pliers for round wires. < = .030" (.76 mm)

Versatile light wire bending pliers. Grooves assist with precise bending and closing of loops. Serrated surface grips wires. < = .020" (.51 mm)

Reduce a multi-process step process down to one step with these wire-forming pliers. Simply squeeze and you are done; NO heat required. These less intrusive pliers are designed for ultimate patient comfort. For NiTi wire only. < = .025” (.64 mm)

Reduce a multi-process step process down to one step with these wire-forming pliers. Simply squeeze and you are done; NO heat required. These less intrusive pliers are designed for ultimate patient comfort. For NiTi wire only. < = .025” (.64 mm )

For NiTi wire only, no heat. < = .025” (.64 mm)

Double-sided offset beak permits bayonet bends on wires up to .022" x .025" (.56 mm x .64 mm)

Double-sided offset beak permits bayonet bends on wires up to .022" x .025" (.56 mm x .64 mm)

Double-sided offset beak permits bayonet bends on wires up to .022" x .025" (.56 mm x .64 mm)

Torquing Pliers for stainless steel wires, with .018"/.022" Key.

Torquing Pliers for stainless steel wires, with .016"/.018" Key.

Multi-use NiTi bender, no heat. < = .025" (.64 mm)

Bends a variety of smooth loops. < = .022" x .025" (.56 mm x .64 mm)

Smooth bending surfaces for a range of loop sizes while providing a sharp blade for cutting. < = .022" x .025" (.56 mm x .64 mm)

Provides optimum accuracy and precision in forming and closing loops with one cylindrical three-step beak and one triangular beak. < = .022" x .025" (.56 mm x .64 mm)

Excellent for forming helical closing loops and arch adjustments. < = .022" x .025" (.56 mm x .64 mm)

Designed for forming and contouring of all archwire, especially for NiTi. < = .020" (.51 mm)

Excellent precise right angle bends and appliance application. < = .040" (1.01 mm)

For precise forming of loops in four lengths: 3, 4, 5 and 6 mm. Groove at base aids in closing loops. < = .022" (.53 mm)

A longer cone than a standard bird beak is useful for forming precise loops in light wire. < = .020" (.51 mm)

Perfect for subtle contouring of arch wires. With reduced radius as compared to Hollow Chop Contouring Pliers. < = .030" (.76 mm)